TOGGLE VALVES - ANGLE PATTERN, BULLETIN F797-2 : Lube Devices

LUBE DEVICES : PRODUCTS : METERING VALVES :
TOGGLE VALVES - ANGLE PATTERN

BULLETIN F797-2
View in PDF format

TOGGLE VALVES - ANGLE PATTERN

LUBE DEVICES' toggle type valves are designed for controlled flow applications that require shutting off at times. This style of valve can be shut off and turned on again without affecting the previous preset drip rate. Fine adjustments can be made and easily locked by the knurled friction lock-ring. The drip rate is clearly visible through the large sight. Gravity feed valves are furnished with a vented sight chamber, provided by a split in the gasket above the sight glass. Valves for pressure applications have a solid gasket in both ends of the sight glass. (Non-vented)

STANDARD MATERIALS:

Brass Construction
Buna N Seals
Pipe threads are dryseal

OPERATING CONDITIONS:

Pressure version is rated for maximum working pressure applications up to 125 PSI (861.9 kPa)
.094 (2.39mm) minimum orifice

For TOGGLE ADJUSTMENT-
See Eng. Std. 103

ANGLE PATTERN

CATALOG NUMBER OUTLET A - INCHES (mm)

GRAVITY PRESSURE
1/8 PTF FEMALE INLET

N471-02 - 1/8 MALE 3.81 (96.77)

N471-03 - 1/4 TUBE 4.00 (101.60)

1/8 NPTF MALE INLET

N472-03 N472-13 1/4 TUBE 4.00 (101.60)

1/4 NPTF MALE INLET

N473-03 - 1/4 TUBE 4.00 (101.60)


LDI Industries, Inc. 1864 NAGLE AVE., P.O. BOX 1810 MANITOWOC, WI 54221 PHONE: (920) 682-6877 FAX: (920) 684-7210	Copyright © Lube Devices, Inc. All Rights Reserved. Privacy Statement