BREATHER-STRAINER ASSEMBLY / SUMP, BULLETIN F1297-1 : Lube Devices

LUBE DEVICES : PRODUCTS : VENTS, BREATHERS, FILTERS :
BREATHER-STRAINER ASSEMBLY / SUMP STRAINER

BULLETIN F1297-1
View in PDF format

BREATHER-STRAINER ASSEMBLY / SUMP STRAINER

Interchangeable 30 mesh 3.00, (76.20mm) 6.00 (152.40mm) and 8.00 (203.20mm) stainless steel strainer permits easy fluid flow. Rapid filling and easy to clean.

The breather cap has deep grip flutes for ease of removal. The removable twist lock breather cap is protected against loss by safety chain. Vented cap is standard, non-vented cap is available - Please specify. Cap and flange are plated for maximum corrosion resistance.

Side mounted breather assembly housing is engineered for use with all strainer lengths.

FB113, FB116, and FB163 furnished with rigid inner guard (Fig B). All models complete with mounting bolts, nuts, lock washers and sealing washers and oil resistant composite gaskets.

STANDARD MATERIALS:

Stainless steel strainer
Chrome plated breather cap
Side mounted breather housing is anodized cast aluminum

OPERATING CONDITIONS:

30 mesh strainer
40 micron filter breather will handle 30 cu. ft. (.84 cu. m) of air per minute at differential pressure of less than 1.00 (25.40mm) Hg.

TOP MOUNTING FB103-116 SERIES
CAD Drawing

SIDE MOUNTING FB153-163 SERIES
CAD Drawing

TOP MOUNTING
CATALOG NUMBER TOP MOUNTING
CATALOG NUMBER A
INCHES
(MM)

WITHOUT GUARD WITH GUARD WITHOUT GUARD WITH GUARD

FB103 FB113 FB153 FB163 3.00
(76.20)

FB106 FB116 - - 6.00
(152.40)

FB108 - - - 8.00
(203.20)

SUMP STRAINER

Rigid one piece inner frame prevents collapse. Wire screening is completely reusable and easily cleaned. Excellent flow-through. Serves most filter requirements; suitable for most hydraulic oils, coolants and lubricants.

STANDARD MATERIALS:

Steel construction
End plates and inner frame (see cutaway) are steel, zinc plated
Stainless steel wire screening

OPERATING CONDITIONS:

5 to 30 GPM (18.9 to 113.6 LPM) range
.2 PSI (1.38 kPa) pressure drop through clean element at rated flow of 150 SSU viscosity oil.

CATALOG NUMBER	A NPT	B DIA. INCHES (mm)	C LENGTH INCHES (mm)	CAP. GPM (LPM)
100 MESH SCREEN	A NPT	B DIA. INCHES (mm)	C LENGTH INCHES (mm)	CAP. GPM (LPM)
SS104	1/2	2.62 (66.55)	3.12 (79.25)	5.0 (18.9)
SS105	3/4	2.62 (66.55)	3.50 (88.90)	8.0 (30.3)
SS106	1	2.62 (66.55)	5.41 (137.41)	10.0 (37.9)
SS107	1-1/4	3.41 (86.61)	6.91 (175.51)	20.0 (75.7)
SS108	1-1/2	3.41 (88.61)	7.91 (200.91)	30.0 (113.6)


LDI Industries, Inc. 1864 NAGLE AVE., P.O. BOX 1810 MANITOWOC, WI 54221 PHONE: (920) 682-6877 FAX: (920) 684-7210	Copyright © Lube Devices, Inc. All Rights Reserved. Privacy Statement